$650 - $1,400
The charger in the box is the easy part. What decides whether your install is $650 or $2,400 is the distance from the panel to the parking spot and whether the panel has capacity left.
Tesla Wall Connector, ChargePoint Home Flex, Emporia, Grizzl-E, Autel, or whatever came with the car. Hardwired or NEMA 14-50, your call. Hardwired gets you the full 48 amps and a cleaner look. A 14-50 receptacle lets you take the unit with you when you move.
A run under 25 feet from a panel with two open slots is the $650 to $900 job. Cost climbs when the panel is full, when the run crosses a finished basement ceiling, when we go underground to a detached garage, or when the service needs a load-management device instead of an upgrade. We measure and price all of that on the free assessment.
Ohio utility and manufacturer rebates move around, so we check what is live the week we quote you instead of repeating a number from last year. We fill out the paperwork with you at the end of the install.
| Job | Our published price | What that includes |
|---|---|---|
| Diagnostic service call | $89 | Waived when you approve the repair the same visit |
| Panel replacement, same amperage | $1,800 - $2,600 | Permit and utility coordination included |
| Service upgrade, 100A to 200A | $2,400 - $3,600 | Meter base, mast, grounding, permit, inspection |
| Level 2 EV charger install, run under 25 ft | $650 - $1,400 | Dedicated 240V circuit, breaker, whip and mount |
| Outlet or switch replacement | $145 - $225 | Per device, same-day |
| Whole-home surge protector | $425 - $650 | Panel-mounted, 5-year equipment warranty |
| Recessed lighting, 6 cans or more | $185 - $260 | Per can, insulated-ceiling rated |
| Ceiling fan install | $220 - $385 | Higher end covers a new box and bracing |
| Standby generator, 22kW installed | $9,500 - $14,000 | Pad, transfer switch, gas connect, permit |
| Whole-home rewire, 1,500 sq ft | $9,000 - $18,000 | Knob-and-tube removal, patching quoted separately |
Ranges are real and quoted before work starts. The final number depends on panel location, run length, drywall repair and your municipality's permit fee — all of which we confirm on site, in writing, before anyone picks up a tool.
Standing offers — mention them when you book
FAQ
Often yes, with a load calculation and sometimes a load-management device that pauses charging while the dryer runs. That is usually far cheaper than a service upgrade. We tell you which one you need before you spend anything.
Hardwired if you want the maximum charge rate and the charger is staying with the house. Plug-in NEMA 14-50 if you rent or you might move it.
Yes. That is a trenched feeder and a small subpanel in the garage, which is a bigger job than a garage-wall install. Expect $2,200 and up depending on trench length.
Most installs are three to five hours. We pull the permit, and your city inspects it like any other 240V circuit.
Call and talk to a person, or book a real arrival window online. Flat-rate price before we start, every time.