$185 - $260 per can
Lighting is the one electrical job people look at every day, which is why sloppy work on it is so obvious. Cans that are not in line. Dimmers that buzz. Four LEDs at slightly different color temperatures over one island.
We lay out the ceiling before we cut anything, confirm the spacing against your furniture rather than against the room, and use insulated-ceiling-rated housings, because Cleveland attics are full of blown-in. $185 to $260 per can on jobs of six or more.
Hardwired LED strip or puck, switched separately from the overheads, driver hidden in the cabinet, no wall warts. This is the cheapest change that makes a kitchen feel renovated.
Low-voltage path and uplighting on a photocell and timer, GFCI-protected exterior circuits, motion floods at the driveway and side door. Buried runs go in conduit at proper depth, not stapled to the fence.
Most dimmer complaints are a compatibility problem between the dimmer and the LED driver. We match them, and if the fixtures you bought will not dim smoothly, we tell you before we install thirty of them.
| Job | Our published price | What that includes |
|---|---|---|
| Diagnostic service call | $89 | Waived when you approve the repair the same visit |
| Panel replacement, same amperage | $1,800 - $2,600 | Permit and utility coordination included |
| Service upgrade, 100A to 200A | $2,400 - $3,600 | Meter base, mast, grounding, permit, inspection |
| Level 2 EV charger install, run under 25 ft | $650 - $1,400 | Dedicated 240V circuit, breaker, whip and mount |
| Outlet or switch replacement | $145 - $225 | Per device, same-day |
| Whole-home surge protector | $425 - $650 | Panel-mounted, 5-year equipment warranty |
| Recessed lighting, 6 cans or more | $185 - $260 | Per can, insulated-ceiling rated |
| Ceiling fan install | $220 - $385 | Higher end covers a new box and bracing |
| Standby generator, 22kW installed | $9,500 - $14,000 | Pad, transfer switch, gas connect, permit |
| Whole-home rewire, 1,500 sq ft | $9,000 - $18,000 | Knob-and-tube removal, patching quoted separately |
Ranges are real and quoted before work starts. The final number depends on panel location, run length, drywall repair and your municipality's permit fee — all of which we confirm on site, in writing, before anyone picks up a tool.
Standing offers — mention them when you book
FAQ
In most cases yes. Remodel housings go in from below through a template cut. Plaster ceilings and finished rooms under an occupied second floor are the harder cases.
2700K for living spaces, 3000K for kitchens and baths, 4000K in garages and workshops. Mixing them in one open room is the mistake we get called back to fix.
Yes. We tell you honestly if a fixture is going to be a problem before we hang it.
Yes, and we make sure the switch box has a neutral, which older Cleveland homes often do not. That is the detail most DIY smart-switch projects die on.
Call and talk to a person, or book a real arrival window online. Flat-rate price before we start, every time.